Dilshad Garden, New Delhi, Delhi
GST No. 07AASCS9603C1Z5
Call 08048952161 92% Response Rate
MULTIPLE EFFECT EVAPORATOR PLANT
Led by the team of efficient professionals, we are able to offer Multiple Effect Evaporator, Plants to our clients. These plants are made using high quality raw component in tandem with international quality standards. Owing to their easy installation, rugged construction and longer functional life, our evaporator plants are highly demanded in the market.
Multiple Effect Evaporator Plants are extensively catering to the needs of textile, pharmaceutical, automobile, chemical and dyeing industries.
FALLING FILM EVAPORATORS
- The Liquid to be concentrated is preheated to boiling temperatures; even thin films enters the heating tube via distributors in the head of the evaporator, flow downward at boiling temperature and is partially evaporated.
- Spreading of liquid to each tube and forming the thin film across area of the tube is the principle of falling film evaporator.
- It can be used for processing liquors, which are sensitive, have a high rate of specific heat transfer, for low fouling, low viscous fluid & for non crystalline solutions.
FORCED CIRCULATION EVAPORATORS
- In Forced Circulation Evaporator the liquid is pumped in the tubes with high velocity. As the liquid enters the separator where the absolute pressure is slightly less than in the tube bundle, the liquid flashes to form a vapor.
- It is suitable for use with materials which tend to foul the heat transfer surfaces and where crystallization can occur in the evaporator in the vapour separator.
STRIPPER SYSTEM
- Stripper systems are used to recovering low boiling solvents form waste water.
- By using stripper, COD reduce in MEE Plant condensed water.
PRODUCT RECOVERY PLANTS
We have supplied product recovery plants to recover products as below:
CONCENTRATION PRODUCTS :-
- Dextrose Concentration- Sodium Acetate- Amino acid Concentration- Phosphoric Acid
- Milk Concentration
SALT RECOVERS : -
- Sodium Sulphate
- Zinc sulphate
- Sodium Chloride
- Manganese sulphate
- Sodium Thio Sulphate
- Sodium Sulphite
- Ammonium Sulphate
Product Brochure
Capacity (KLD) | 500 KLD |
Application Industry | Pharmaceutical & Chemicals |
Inlet Flow Rate(m3/day) | 500 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Installation Service | Yes |
Water Source | Industrial Effluent, Commercial Waste Water, Municipal Sewage |
Automatic Grade | Manual, Automatic, Semi-Automatic |
Control Module | Available |
Deliver Type | PAN India |
Installation Type | Prefabricated, Completes Civil work with Installation, Containerized Plug & Play |
Warranty | 1 Year |
I Deal In | New Only |
Country of Origin | Made in India |
Type | Disc-tube Module Components |
Application | Zero Liquid Discharge wastewater |
Features | Anti-fouling and low cost |
Zero Liquid Discharge (ZLD) is an advanced water treatment technology that recovers nearly all the water and other liquids from industrial waste streams. The resulting concentration of solid matter, which must be disposed of in a landfill, can be as much as 100 times less than would ordinarily be concentrated by conventional wastewater treatment processes.
Zero liquid discharge plant are also termed in this way Zero Liquid Discharge System, Zero Liquid Discharge Plant, zld plant, ZLD evaporator
Zero Liquid Discharge (ZLD) is an industry term that refers to a waste water management system where the effluent discharged from an industrial unit does not contain any liquid. ZLD is also commonly referred to as "Zero Liquid Discharge (ZLD)", as well as “Zero Liquid Out (ZLO)", to indicate that no liquid effluent should be present. In addition, ZLD is often used interchangeably with “Near Zero Liquid Discharge (NZLD)." However, the term NZLD has more stringent requirements than that of ZLD.
The objective of this project is to design and develop a ZLD system for the Chemical Plant. This system has several objectives including: eliminate a liquid waste water discharge, generate solids for landfill disposal or reuse, recycle a high-quality water that can be beneficially reused, minimize capital investment and system operating cost while not significantly impacting the manpower required for operation. The system must be designed with operational flexibility to meet the facility needs and be safe.
View Complete details
Product Brochure
Capacity (KLD) | 500 KLD |
Inlet Flow Rate(m3/day) | 500 m3/day |
Treatment Technology | Mixed Bed Bio Reactor(MBBR) |
Installation Service | Yes |
Water Source | Industrial Effluent, Commercial Waste Water, Municipal Sewage |
Automatic Grade | Automatic, Semi-Automatic, Manual |
Control Module | Available |
Deliver Type | PAN India |
Installation Type | Containerized Plug & Play, Completes Civil work with Installation, Prefabricated |
Treatment Stages | Secondary Treatment, Primary Treatment, Preliminary Treatment, Tertiary Treatment |
Warranty | 1 Year |
I Deal In | New Only |
Country of Origin | Made in India |
Type | Disc-tube Module Components |
Application | Zero Liquid Discharge wastewater |
Features | Anti-fouling and low cost |
View Complete details